49 products
Chicago Pneumatic, Model QRS5.5, comes with Tri-voltage motor with optional tank and refrigerated air dryer. Operating Pressure: 145 psig Flow Rate: 9.4 cfm (model/pressure dependent) Total absorbed p…
Starting at
$6,495.008 configurations available
The Mark Model MSU10, comes with TEFC tri-voltage motor with optional tank and refrigerated air dryer. Operating Pressure: 116 – 145 psig Flow Rate: 36.1 – 34.1 cfm (model/pressure dependent) Total ab…
Starting at
$5,843.004 configurations available
Chicago Pneumatic Model RCP-C Gas, comes with a Honda, Kohler or Briggs-Vanguard gasoline powered engine. Operating Pressure: 175 psig Flow Rate: 23-32 cfm (model/pressure dependent) Total HP: 16 hp: …
Starting at
$4,778.0018 configurations available
General specifications non-cycling dryers: Operating Pressure: 102 PSI(7 bar) Inlet temperature:95°F (35°C) Max. inlet temperature: 131°F Ambient Temperature Range: 41-109°F Pressure dew point: up to …
Starting at
$2,839.004 configurations available
Chicago Pneumatic, Model QRS3, comes with Tri-voltage motor with optional tank and refrigerated air dryer. Operating Pressure: 116 – 145 psig Flow Rate: 12.6 – 9.4 cfm (model/pressure dependent) Total…
Starting at
$5,499.008 configurations available
Chicago Pneumatic, Model QRS7.5, comes with Tri-voltage motor with optional tank and refrigerated air dryer. Operating Pressure: 145 psig Flow Rate: 9.4 cfm (model/pressure dependent) Total absorbed p…
Starting at
$6,995.008 configurations available
General Specifications Non-cycling refrigeration dryers Operating Pressure: AD 15 - 65: 4-16 barg/60-232 psig AD 85 - 4200: 4-14 barg/60-203 psig Max. inlet temperature: 55°C/113°F Flow rate: 21 - 720…
Starting at
$1,995.0020 configurations available
The Mark Model MSU3, comes with tri-voltage or single phase motor with optional tank and refrigerated air dryer. Operating Pressure: 116 – 145 psig Flow Rate: 13.1 – 9.8 cfm (model/pressure dependent)…
Starting at
$4,200.0016 configurations available
The Mark Model MSU5.5, comes with tri-voltage or single phase motor with optional tank and refrigerated air dryer. Operating Pressure: 116 – 145 psig Flow Rate: 20.1 – 18.1 cfm (model/pressure depende…
Starting at
$4,420.0016 configurations available
The Mark Model MSU7.5, comes with tri-voltage or single phase motor with optional tank and refrigerated air dryer. Operating Pressure: 116 – 145 psig Flow Rate: 29.3 – 26.1 cfm (model/pressure depende…
Starting at
$5,060.0016 configurations available
The Mark Model MSU15, comes with TEFC tri-voltage motor with optional tank and refrigerated air dryer. Operating Pressure: 116 – 145 psig Flow Rate: 51.9 – 45.1 cfm (model/pressure dependent) Total ab…
Starting at
$6,446.008 configurations available
General specifications non-cycling dryers: Operating Pressure: 102 PSI(7 bar) Inlet temperature:95°F (35°C) Max. inlet temperature: 131°F Ambient Temperature Range: 41-109°F Pressure dew point: up to …
Starting at
$1,568.0010 configurations available
General specifications non-cycling dryers: Operating Pressure: 102 PSI(7 bar) Inlet temperature:95°F (35°C) Max. inlet temperature: 131°F Ambient Temperature Range: 41-109°F Pressure dew point: up to …
Starting at
$3,722.006 configurations available
Part number 6221372850 is an industrial spin-on air/oil separator manufactured by Chicago Pneumatic for QRS10/15 and Quincy QGS10/15 rotary compressors. Featuring HV glass fiber in a steel casing, it …
Starting at
$295.861 configuration available
Part number 6211472550 is an industrial spin-on oil filter manufactured by Chicago Pneumatic for QRS10/15 and Quincy QGS10/15 rotary compressors. Using premium pleated media with Viton seals, it achie…
Starting at
$51.511 configuration available
Part number 6211473950 is an industrial air intake filter manufactured by Chicago Pneumatic for QRS10/15 and Quincy QGS10/15 rotary compressors. Using heavy-duty pleated paper media, it achieves 3-mic…
Starting at
$64.281 configuration available
Part number 1630203200 ( RotAir Xtra ) is a premium synthetic rotary screw compressor lubricant sold by Chicago Pneumatic and Atlas Copco . Packaged in a 5-gallon (20-liter) container , this ISO 46 vi…
Starting at
$615.121 configuration available
Part number 6221372450 is an industrial spin-on air/oil separator manufactured by Chicago Pneumatic for 20 HP and 25 HP rotary compressors like the QRS20/25. Utilizing high-efficiency coalescing media…
Starting at
$355.041 configuration available
Part number 6211472350 is an industrial air intake filter element manufactured by Chicago Pneumatic and Quincy for larger 20 HP to 30 HP rotary screw compressors , such as the QRS20-30 series. Using h…
Starting at
$79.051 configuration available
Part number 6211472250 is an industrial spin-on oil filter manufactured by Chicago Pneumatic and Quincy for 20 HP to 30 HP rotary screw compressors like the QRS 20–30 series. Utilizing high-efficiency…
Starting at
$121.761 configuration available
Chicago Pneumatic Model RCP-C5 Premium, comes with Air-Cooled Aftercooler, Low-Oil Level Switch and Tank Drain with optional TEFC motor. Operating Pressure: 100-175 psig Flow Rate: 18 cfm (model/press…
Starting at
$4,455.006 configurations available
Saylor-Beall Model VT-735-80, ODP, NEMA-1 starter enclosure w/optional TEFC motor. Operating Pressure: 175 psig Flow Rate: 17.3 cfm (model/pressure dependent) Total absorbed power at full load (100 ps…
Starting at
$3,424.008 configurations available
This air/oil separator element is designed for Sullivan-Palatek rotary screw air compressors from 15-40 hp. It efficiently removes oil mist aerosols from the compressed air stream, recycling the oil b…
Starting at
$525.001 configuration available
OEM-equivalent design matches original dimensions, micron specs, and burst pressures. Premium microglass media provides high-efficiency filtration down to 10-20 microns. Heavy-duty construction uses a…
Starting at
$69.001 configuration available
Sullivan-Palatek, part number 00520-060 air filter for 15-40 D series air compressor.
Starting at
$70.671 configuration available
The T120V-200 is a heavy-duty, 120-gallon vertical air receiver tank certified by ASME to safely hold up to 200 PSI of compressed air. Built for large commercial systems, this stationary tank stores b…
Starting at
$1,657.874 configurations available
Atlas-Copco OEM maintenance service kit with air filter, oil filter and separator element.
Starting at
$395.231 configuration available
OEM Atlas-Copco maintenance kit includes air filter, oil filter and separator. Aftermarket replacement kit available.
Starting at
$335.431 configuration available
Atlas-Copco OEM spin-on, air-oil separator
Starting at
$414.351 configuration available
Ingersoll-Rand replacement part, Air/Oil Separator, spin-on
Starting at
$157.001 configuration available
Ingersoll-Rand replacement air-oil separator, spin-on
Starting at
$134.561 configuration available
Quincy-OEM spin-on separator element matches 10.25-inch height and 4.31-inch Diameter. Advanced micro-glass media uses high-efficiency coalescing down to .3 microns High-performance oil reduction syst…
Starting at
$88.331 configuration available
Ingersoll-Rand replacement filter element.
Starting at
$39.001 configuration available
Sullivan-Palatek, replacement oil filter element for 15-40hp Sullivan Palatek. OEM filters are always available.
Starting at
$44.561 configuration available
Chicago Pneumatic and Quincy drive belt set (1) for QRS 3-7.5hp and QGS 3-7.7hp.
Starting at
$60.021 configuration available
FS-Curtis replacement for OEM spin-on air/oil separator.
Starting at
$289.001 configuration available
FS-Curtis Air/Oil spin-on separator element, OEM
Starting at
$434.001 configuration available
Engineered to match original equipment dimensions perfectly. Meets or exceeds factory filtration efficiency standards. Features robust seals to withstand high temperatures. Utilizes high-grade media t…
Starting at
$46.001 configuration available
OEM part for FS-Curtis and Fu Sheng industrial rotary screw compressors. Extracts solid contaminants and debris from oil. Minimizes compressor wear for longer component life. Prevents premature cloggi…
Starting at
$102.221 configuration available
Matches Sullivan-Palatek, Joy, and Multiquip rotary screw air compressors. Extracts oil aerosols and fine mist from the compressed air stream. Minimizes oil carryover into downstream lines to deliver …
Starting at
$249.001 configuration available
Matches Sullair 185 L3 and LS10 compressors Extracts oil aerosols from compressed air Minimizes oil carryover into downstream lines Prevents oily residue buildup on equipment Returns separated oil to …
Starting at
$184.001 configuration available
Matches Ingersoll Rand UP5/UP6 rotary compressors. Extracts vaporized oil and fine mist. Prevents downstream equipment and tool contamination. Lasts 4,000 operational hours or one year. Replaces origi…
Starting at
$178.001 configuration available
Product: Spin-on Air/Oil Separator Element. Function: Removes oil mist from compressed air in rotary screw compressors. Compatibility: Ingersoll Rand 5–15 HP models (Nirvana, UP-Series, Unigy). Servic…
Starting at
$134.561 configuration available
Product: ELGi B006700770010. Spin-on Air/Oil Separator Element. Function: Captures oil mist and returns it to the lubrication circuit to ensure clean compressed air. Dimensions: 5.51" Outer Diameter (…
Starting at
$219.001 configuration available
Saylor-Beall Model VT-735-60/80/120, ODP, NEMA-1 starter enclosure w/optional TEFC motor. Operating Pressure: 175 psig Flow Rate: 17.3 cfm (model/pressure dependent) Total absorbed power at full load …
Starting at
$3,284.1318 configurations available
Saylor-Beall Model VT-737-120, ODP, NEMA-1 starter enclosure w/optional TEFC motor. Operating Pressure: 175 psig Flow Rate: 18.5 cfm (model/pressure dependent) Total absorbed power at full load (100 p…
Starting at
$6,470.9912 configurations available
Saylor-Beall Model VT-745-120, ODP, NEMA-1 starter enclosure w/optional TEFC motor. Operating Pressure: 175 psig Flow Rate: 26.2 cfm (model/pressure dependent) Total absorbed power at full load (100 p…
Starting at
$5,980.2712 configurations available
Saylor-Beall Model VT-745-120, ODP, NEMA-1 starter enclosure w/optional TEFC motor. Operating Pressure: 175 psig Flow Rate: 34.4 cfm (model/pressure dependent) Total absorbed power at full load (100 p…
Starting at
$6,890.626 configurations available
OEM-equivalent design matches original dimensions, micron specs, and burst pressures. Premium microglass media provides high-efficiency filtration down to 10-20 microns. Heavy-duty construction uses a…
Starting at
$175.001 configuration available
